In which case, a converter will do the job if you can’t make a direct optical connection. DVD or Blu-ray player to amplifier: in some cases, you might want to directly connect the audio output of a DVD or Blu-ray player to a stereo amplifier.TV to soundbar: If your TV has an optical output, but your soundbar only supports a stereo RCA connection, then you could use a converter to wire this together.Here are some other situations where you might want to use a converter: When Else Would You Need to Convert Optical Audio to RCA Stereo?Ĭonnecting the optical output of a TV to a stereo amplifier is probably the most common reason to convert optical audio to RCA, but there are many other situations where you may want to do this. You can buy a converter box at most online or brick-and-mortar stores that sell audio-visual equipment. This is fine, and you will just need to use the optical connection. Some converters may also have other digital inputs, like coaxial. The optical connection may also be labeled SPDIF or TOSLINK, which is OK, so don’t let that confuse you. There are several different types of converter boxes, so you must buy the correct one for the job. The main thing is to check that the converter has an optical input – for receiving the digital audio – and a stereo analog RCA output for sending the converted analog audio. It is commonly used to send digital audio from a TV or Blu-ray player to an analog playback device like an amplifier or soundbar. What is an Optical to RCA Stereo Analog Converter?Īn optical to RCA converter is a device that receives an optical audio signal, converts it, then outputs that audio as a stereo analog signal. If you still hear no sound, go back and check the wiring to the converter box and make sure that it is switched on.įinally, double-check that the optical audio output is enabled in the TV’s audio menu. If not, make sure that the volume is up on your amplifier. If your TV is still on, you should now get sound from the TV on your speakers.

Best buy digital optical converter